Chapter 10. Replacing Frus; 3227, 3306, 3393, And 3395); Handling Static-Sensitive Devices; Installing Or Replacing Hardware - Lenovo ThinkCentre M82 Hardware Maintenance Manual

Hardware maintenance manual (hmm) (may 2012) - thinkcentre m82, m92, m92p
Hide thumbs Also See for ThinkCentre M82:
Table of Contents

Advertisement

Chapter 10. Replacing FRUs (machine types: 2756, 2800, 2929,
2932, 2934, 2941, 2945, 2961, 2982, 2988, 2993, 2996, 3181, 3183,
3185, 3187, 3198, 3202, 3207, 3209, 3214, 3218, 3224, 3227, 3306,
3393, and 3395)
This chapter provides information about the FRU replacement instructions.
Important: Be sure to read and understand Chapter 2 "Safety information" on page 3 before replacing any
FRU. These precautions and guidelines will help you work safely.
Note: FRU replacements are to be done only by trained service technicians.

Handling static-sensitive devices

Do not open the static-protective package containing the new part until the defective part has been removed
from the computer and you are ready to install the new part. Static electricity, although harmless to you, can
seriously damage computer components and parts.
When you handle computer parts and components, take these precautions to avoid static-electricity damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always carefully handle the parts and other computer components. Handle PCI cards, memory modules,
system boards, and microprocessors by the edges. Never touch exposed circuitry.
• Prevent others from touching the parts and other computer components.
• Before you replace a new part, touch the static-protective package containing the new part to a metal
expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This
reduces static electricity from the package and your body.
• Remove the new part from the static-protective package and directly install it in the computer without
placing it on any other surface. If it is hard for you to do this in your specific situation, place the
static-protective package of the new part on a smooth, level surface, and then place the new part on
the static-protective package.
• Do not place the part on the computer cover or other metal surface.

Installing or replacing hardware

Attention: Do not open your computer or attempt any repair before reading and understanding the "Important
safety information" on page 1.
This section provides instructions on how to install or replace hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by installing or replacing hardware.
Notes:
1. Use only computer parts provided by Lenovo.
2. When installing or replacing an option, use the appropriate instructions in this section along with the
instructions that come with the option.
© Copyright Lenovo 2012
153

Advertisement

Table of Contents
loading

Table of Contents