HP t5325 - Thin Client Troubleshooting Manual page 12

3. Slide the side of the mounting device attached to the thin client (1) over the other side of the
mounting device (2) on the device on which you want to mount the thin client. An audible 'click'
indicates a secure connection.
Figure 2-4
NOTE: When attached, the HP Quick Release automatically locks in position. You only need to
slide the lever to one side to remove the thin client.
CAUTION:
components, make sure both the release lever on one side of the mounting device and the rounded
opening on the other side face upward.
6 Chapter 2 Mounting the Thin Client
Connecting the thin client
To ensure proper function of the HP Quick Release and a secure connection of all