Paper Jam In The Hanging Finisher Mj-1031 (Optional) - Oki CX4545 MFP Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Paper jam in the Hanging Finisher MJ-1031 (optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
1
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
2
Open the cover holding the handle of the Bridge Unit.
3
Remove the jammed paper inside the Bridge Unit.
4
Close the cover of the Bridge Unit.
5
Remove the jammed paper in the exit portion.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 33