Handing Over To The Owner - Vaillant VRT 360 Operating And Installation Manual

Dial Test
Turn Circulation
pump
Press Display test
Press Software ver-
sion
Table 11.2 Service/diagnostic level
Restoring the default settings
• To return the room thermostat to its
default settings, press the P button for
15 seconds.
As soon as the display lights up twice,
the room thermostat has been reset.
VRT 360 Installation Manual
Test procedure
The circulation pump
is activated. All
other elements are
switched off.
All display elements
are displayed.
The software version
is displayed.
This means that you will have to per-
form all individual settings again.
11.3

Handing over to the owner

The owner of the room thermostat must
be instructed about its functions and
how to operate it.
• Hand over any instructions intended
for the owner as well as the room ther-
mostat documents.
• Go through the operating manual with
the owner and answer any questions.
• Draw special attention to the safety
instructions which the owner must fol-
low.
• Tell the owner to keep the instruction
manuals near the room thermostat.
Start-up 11
37