Table of Contents
Advertisement
ACPI Function
This feature allows you to Enable or Disable the ACPI (Advanced Configuration
and Power Interface) function. ACPI establishes industry-standard interfaces for
OS-directed configuration and power management on laptops, desktops, and
servers.
Enabled / Disabled
ACPI Suspend Type
This option specifies the method to be used hibernate.
S1 (POS) (Power on Suspend) / S3 (STR) (Suspend to RAM) / S1 & S3
Power Management
This function allows you to set the default parameters of power-saving modes.
Set this to User Define to choose your own parameters. The following table
shows the parameters for Maximum Saving and Minimum Saving options for
the various modes:
Mode
Doze
Standby
Suspend
HDD Power Down
Min Saving
1 hour
1 hour
1 hour
15 min
Max Saving
1 min
1 min
1 min
1 min
Video Off Method
This option defines the method used to power off video.
Blank Screen / VH SYNC + Blank / DPMS Support
HDD Power Down
This setting defines the delay before the hard drive is powered down.
Disabled / 1~15 min
HDD Down in Suspend
This setting defines the delay before the hard drive is powered down in suspend
mode,
Disabled / Enabled
Soft-Off by PBTN
This determines how long the power button needs to be pressed to switch off
the PC. Options are:
Instant-Off / Delay 4 Sec.
Inturder Detection
This feature is used to enable the function of intruder detection.
Enabled / Disabled
PowerOn After Pwr-Fail
This option defines the state of the system when power fails and returns again.
If On is selected, the system automatically switches on when power is resumed.
63
http://www.tyan.com
Advertisement
Table of Contents
