Table of Contents
Advertisement
3.7.3 CD-ROM Boot Priority
This item allows you to select the CD-ROM boot priority. It is available only
when the CD-ROM drive is connected.
1.
Pri.Slave
2.
Sec.Slave
3.
Pri.Master
4.
Sec.Master
5.
USB-CDROM1
6.
USB-CDROm0
Virus Warning
This item allows you to use the function of virus warning.
Enabled / Disabled
CPU Internal / External Cache
This option toggles the use of CPU L1 or L2 cache. The L1 cache is also called
the primary cache or internal cache. The L2 cache also called as the external
cache is placed between the CPU and the DRAM (dynamic RAM).
Enabled / Disabled
Quick Power On Self Test
This option allows you to use the function of quick power on test.
Enabled / Disabled
First, Second, and Third Boot Devices
These indicate the boot priority. For example if the First Boot Device is set as
Removable, the Second Boot Device as CDROM, and the Third Boot Device as
Hard Disk, then the system will try to boot from a removable drive. If it fails, the
system will try to boot from a CDROM. If this also fails, it will try to boot from the
Hard Disk.
Boot Other Device
This option allows the system to boot from any other bootable device.
Enabled / Disabled
Swap Floppy Drive
This feature allows the system to swap floppy drive.
Enabled / Disabled
Phoenix-AwardBIOS CMOS Setup Utility
CD- ROM Boot Prioiry
DVD-ROM DDV1621
http://www.tyan.com
50
Item Specific Help
Advertisement
Table of Contents
