Specifications - THORENS TEM 3200 User Manual

Specifications
System
Continuous power output
(per channel, both channels driven)
IMD 60 Hz: 7 kHz = 4:1 SMPTE,
1 W, 8 ohms
Damping factor (1 kHz, 8 ohms)
Frequency response
Signal to noise ratio
weighted / unweighted
Input impedance
Input
Power supply
Power consumption
Dimensions (WxHxD)
Weight (net)
Specifications are subject to change without prior notice.
Power amplifier (mono)
IEC standard, 20 – 20,000 Hz
2 ohms, 0.7% THD
4 ohms, 0.7% THD
8 ohms, 0.7% THD
DIN standard, 1 kHz
2 ohms, 0.7% THD
4 ohms, 0.5% THD
8 ohms, 0.3% THD
no more than 0.004%
> 500
200 W
20 - 20,000 Hz, +0 dB, -0.2 dB
1 W
5 - 100,000 Hz, +0 dB, -0.2 dB
200 W, 8 ohms
more than 110 dB / 100 dB
1 W, 8 ohms
more than 90 dB / 80 dB
10 kohms
3-pin XLR-jack
Pin 1: ground, Pin 2: +, Pin 3: -
depending on your country
see p. 9.
650 W max.
120 W idle
no stand-by
8.6 x 14.6 x 14.6 "
225 x 370 x 370 mm
61.7 lbs (28.0 kg)
Made in Germany
12
690 W
400 W
200 W
730 W
400 W
210 W