Operating - THORENS TEM 3200 User Manual

Operating

Light switch �
The Light switch controls the brightness of the blue front illumination
unit for the THORENS sign. You can choose between low and high
brightness by pushing the switch left or right.
Front panel controls
Power button and indicator
Press this button to turn the power on, the blue THORENS power
indicator will light up. Press again to turn off the power (the indicator
becomes dark).
The TEM 3200 needs approximately 3 minutes until it is pow-
ered up and ready for use.
Important information for long-term usage
The TEM 3200 features an automatic bias control for all operating
points, and all stages are DC-coupled. Therefore the amplifier has
a quick power-up time and is fully operational after only a few mi-
nutes. It is unnecessary and not recommended to leave it turned on
constantly. Long-term usage may cause early deterioration of tubes
and thus shortens the product's life span. The increased power con-
sumption poses an unneeded burden to the environment.
10