Table of Contents
Advertisement
8.
Oil lubrication
8.1
General
22
Caution: Danger of injury!
Oil can cause skin rashes.
Avoid longer skin contact.
After contact wash yourself thoroughly.
ATTENTION!
The handling and disposal of mineral oils is subject to legal constraints.
Deliver used oil to an authorized reception point.
Protect your environment.
Take care not to spill any oil.
Oil the sewing machine exclusively with the lubricating oil DA-68 or
equivalent oil with the following specifications:
–
Viscosity at 40°C :
–
Flash point:
DA-68 can be purchased at sales branches of
DÜRKOPP ADLER AG, under the following part number:
1 liter container: 9047 000041
5 liter container: 9047 000042
Rule and control
The lubrication of the sewing machine head occurs via oil filling points
in the cast body. Additionally, the listed lubricating points are to be
supplied with oil.
At the latest after 40 hours of operation all lubricating points shown in
the following illustrations are to be lubricated.
–
Remove the head cover.
–
Supply all lubricating points with few drops of oil DA-68.
–
Attach the head cover again.
2
65 mm
/s
212 °C
Hide quick links:
Advertisement
Table of Contents
