Operation - Dodge Caliber Owner's Manual

Voice Recognition Button
Actual button location may vary with radio.
The individual buttons are described in the
"Operation" section.
The UConnect™ system can be used with any Hands-
Free Profile certified Bluetooth™ cellular phone. See
UConnect™ website for supported phones. If your cellu-
lar phone supports a different profile (e.g., Headset
Profile) you may not be able to use any UConnect™
features. Refer to your cellular service provider or the
phone manufacturer for details.
The UConnect™ system is fully integrated with the
vehicle's audio system. The volume of the UConnect™
system can be adjusted either from the radio volume
control knob or from the steering wheel radio control
(right switch), if so equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81
The radio display will be used for visual prompts from
the UConnect™ system such as CELL or caller ID on
certain radios.

Operation

Voice commands can be used to operate the UConnect™
system and to navigate through the UConnect™ menu
structure. Voice commands are required after most
UConnect™ system prompts. You will be prompted for a
specific command and then guided through the available
options.
• Prior to giving a voice command, one must wait for
the beep, which follows the Ready prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying Setup and then
Phone Pairing, the following compound command
can be said: Setup Phone Pairing.
3