Advertisement
PIPING FOOT
Prepare a piece of ready-made piping (corded bras fold tape(.
Piace folded pip ng between seam edges with fold extending
beyond seam hoe toward garment Pin or baste and stitch the
seam.
Braid or sbbon may also be used, either flat or lot ded brad can
be used ri straight seams
Use for decorating edges of 001 era, cuffs, pockets, etc.
PEARL FOOT
1. PEARLS ALONG AN EDGE:
Set for left needle remove right needle( 3-thread aser ock
Set tensions as follows:
Left needle' 4
Upper looper: 1 -2
Lower ooper: 7 -8
SEW:
• Remove regular foot: replace with pearl foot.
• Remove stitch finger as you did tar a rolled edge
• Swing cutter away to lowest position, close front covers
Raise the needle to it's highest position.
• Place pearls n the channel on the right aide of the foot
with 2 of pearls extending behind foot,
Take one stitch with the hand wheel to secure the pearls
• Follow edge of fabric along fabric guide.
• Sew pearls on edge of fabric,
• Return cutter to original position when finished,
2. PEARLS SEWN WITH A FLAT LOCI( STITCH:
FABRIC:
Med um weight woeen
2 or 4mm oearls
Set for a 3-thread flat lock, left needle only.
SEW:
Remove regu sr foot: replace w th pear foot,
• Insert small stitch finger
• Swing cutter away to lowest posit on.
-
Raise needle to its highest aosition.
• Place pearls n channe on right side of the toot with 2 of
pearls estending behind toot.
• Take one attch with the hand wheel to secure the pearls.
• Sew pearls an with the left needle lust catching the fold of
the fabric.
• Pull flat lock open
PIE PRENSATELAS PARA TRENZAS
DECORATIVAS
Preparar uris p eza de trencilla (crete plegada sesgads con
0
an cordon intenor(.
Calacar ía trencilla plegade en at horde do Ion materials a
coser.
Suletar
0
hilvanar y coser Is costura.
Se pueden ussr trenzas planes o plegadas ac ntas hechea.
Usado pare hordes decoretisos dv cuellos, punas, bolsi on, etc.
El pie pars trenza cusi viva este disponible como an extra
opciona.
PRENSATELAS PARA PERLAS
1. PERLAS A LO LARGO DEL BORDE
Pars filer Ia aguía izquierda (quitar Is agu a derechal a 3
hilos de overlook
PIe lea tensiones como so luatra:
Agus izquierde: 4
Ancors superior: I
2
Ancors interior: 7-8
COSA:
• Quite el pa prensate as noimal; reemp acela con e pie
prensatelaa pars perlas.
Quite xl dedo de puntads como usted hizo pars el
dobleditla de enrollsdo.
• Fi(e Is cuchills moral a su posicion max bela y cierre Ia
taps frontal.
• Lessnte Is egue a su pasician man sIts.
• Colaque lea panes en Ia ranura en el lado izquierdo del
pie prensateles con 4 cm de panes entendiendolas atras
del pie pransateiss.
Case uns puntads con e valante pars suletar las panes.
• Siga xl horde del material a 10 Isrgo
us
Is guis del material.
Cosa las panes en el horde dv matenal.
Regnese Is cuchilla asu posician ong nel cuando termine.
2
PERLAS COSIDA CON PUNTADA DE COSTURA PLFNA
MATERIAL:
To(ido de peso media
204mm pares
Pars tIer Is costura Plans a 3 hilos, salemante use Is agula
izquisrds,
COSA;
• Outs 01 pie pronsatelas norms: pangs ei pie prensatelss
pare perle.
• Inserts el dedo de puntada pequeno.
Fi
1
e Is cuchills movil a su posicion reds bras
Lesente Is sgus 5 5U posiclan men sits,
• Co aqua Ian perlss en Is renurs del lada derecha del pie
pronnetelas con 4 cm dv per las eetendiendolas atras del
pie prennateles.
• Cons Uris puntads canal solante pars suleter Ian pares.
• Coas Ian perlsa con Is agua izquierda sgsrrando el
duklado del material.
34
Advertisement
