Cruise Control; Downhill Assist Control System (Dac); Hill-Start Assist Control (Hac); Power Outlets-12V Dc - Toyota RAV4 Quick Reference Manual

FEATURES/OPERATIONS

Power outlets-12V DC

Instrument panel
Luggage compartment
NOTE: Designed for car accessories. Engine switch/"ENGINE START STOP"
switch must be in the "ACC" or "ON" position to be used.
Power outlets-120V AC (if equipped)
Push
ON/OFF switch
NOTE: Engine switch/"ENGINE START STOP" switch must be in the "ON"
position to be used.

Downhill Assist Control system (DAC)

DAC helps the vehicle to descend steep hills while maintaining a low speed
without brake pedal operation. Press the "DAC" button (indicator will
blink). Shift into L or R to activate (indicator will be solid). Pressing the
button again will turn system off.
Refer to the Owner's Manual for more details.
Inside center console
Rear console
22

Hill-start Assist Control (HAC)

(if equipped)
Brake
pedal
HAC helps prevent rolling backwards on an incline. To engage, push
further down on brake pedal while at a complete stop until a beep sounds
and slip indicator illuminates. HAC holds for approximately 2 seconds after
releasing brake pedal.
Refer to the Owner's Manual for more details.

Cruise control

Turning system ON/OFF
Functions
Cancel
1
Set/Decrease speed
The set speed may also be cancelled by depressing the brake pedal.
1
The set speed may be resumed once vehicle speed exceeds 25 mph.
2
Refer to the Owner's Manual for more details.
System ON/OFF
Resume /Increase speed
2
23