Cd Changer Operation; Controlling Cd Changer (Optional); Music Sensor (M.s.) Skip; Fast Forward And Backward - Alpine TDM-7582R Owner's Manual

CD Changer Operation

DN g
f UP

Controlling CD Changer (Optional)

If an optional Alpine 6-disc CD Changer (M-Bus)
is connected to the 8-pin DIN connector of the
TDM-7586RB/TDM-7584R/TDM-7582R you can
control the CD Changer using the TDM-7586RB/
TDM-7584R/TDM-7582R.
NOTE
The CD controls on the TDM-7586RB/TDM-7584R/TDM-
7582R for the CD operation are functional only when the
CD Changer is interconnected with the TDM-7586RB/
TDM-7584R/TDM-7582R.
1
Press the SOURCE button to activate the CD
Changer.
The display shows the disc number and track
number.
2
Make sure that the Function indicator illuminates,
then press the Preset buttons to select the
desired disc loaded in the CD Changer.
3
To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
NOTES
• If the "F" indicator is illuminated the Disc Select
buttons become nonfunctional.
• Press the SOURCE button to activate the CHANGER
mode.
SOURCE
-/J
Preset buttons

Music Sensor (M.S.) Skip

1
Press the DN g button once to return to the
beginning of the current track.
If you wish to return to the beginning of a track
further back, repeatedly press until you reach the
desired track.
Press the f UP button once to advance to the
beginning of the next track.
If you wish to advance to a track further ahead,
press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or
pause mode.

Fast Forward and Backward

1
Press and hold the DN g or f UP button to
quickly move backward or forward respectively
until you reach the desired portion.
NOTE
This feature works only in the CD playback mode.
13
-EN