Electrolux U28190 Instruction Manual page 8

7. Display
The display shows the following information:
Duration of the programme - Delayed start -
Incorrect option selection - Alarm code - End of
programme.
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of fabric.
After the programme has started, the time remaining
is updated every minute
Delayed start
The selected delay (23 hours max) set by means of
the relevant button appears on the display for 3
seconds, then the duration of the previously selected
programme is displayed.
The countdown is updated every hour and for the last
2 hours it is updated for each 30 min.
Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed
for 2 seconds.
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph "Something not working").
End of programme
When the programme has finished a flashing zero is
displayed.
8
Alarm codes