Campbell Hausfeld DG460300CK Operating Instructions And Parts Manual page 2

Operating Instructions and Parts Manual
General Safety result in a risk of fire and electric
shock. If an extension cord must be
Information
(Cont'd.) used, make sure:
• That the pins on plug of extension
8. Use steady, even pressure when
cord are the same number, size and
using tool. Do not force. Too much
shape as those of plug.
pressure can cause blade to break
• That the extension cord is
or overheat.
properly wired and in good
9. Keep all nuts, bolts and screws tight
electrical condition.
and ensure equipment is in safe
• If an extension cord is to be used
working condition.
outdoors it must be marked with
10. Do not put hands near or under
the suffix "W-A" or "W" following
moving parts.
the cord type designation to
indicate it is acceptable for outdoor
WORK AREA
use. For example – SJTW-A
WARNING
3. Do not expose to rain, snow or
!
Do not operate a
frost.
power tool in an explosive atmosphere,
such as in the presence of flammable
PERSONAL SAFETY
liquids, gases, or dust. Power tools
create sparks which may ignite the
WARNING
!
fumes or dust.
product. Excessive exposure to
vibration, work in awkward positions,
CAUTION
!
Keep work area
and repetitive work motions can cause
clean and well lighted. Cluttered
injury to hands and arms. Stop using
benches and dark areas invite
any tool if discomfort, numbness,
accidents.
tingling, or pain occur, and consult
a physician.
CAUTION
!
1. Stay alert, watch what you are
Keep bystanders,
doing, and use common sense when
children, and visitors away while
operating a power tool. Do not use
operating a power tool. Distractions
tool while tired or under the
can cause you to lose control.
influence of drugs, alcohol, or
ELECTRICAL SAFETY
medication. A moment of
Double insulated tools are equipped with inattention while operating power
tools may result in serious personal
a polarized plug (one plug blade is wider
injury.
that the other). this plug will fit in a
polarized outlet only one way. If the plug
CAUTION
does not fit fully into the outlet, turn the !
plug over and insert into plug again.
starting. Be sure switch is in the locked
or off position before making any
WARNING
! adjustments, changing accessories, or
Do not expose
storing the tool. Carrying tools with
power tools to rain or wet conditions.
your finger on the switch with the
Water entering a power tool will
switch on invites accidents.
increase the risk of electric shock.
2. Remove adjusting keys or wrenches
WARNING before turning on the tool. A key or
!
Avoid body contact
wrench attached to a rotating part
with grounded surfaces such as pipes,
of the tool may result in personal
radiators, ranges, and refrigerators.
injury.
There is an increased risk of electric
3. Do not overreach. Keep
shock if your body is grounded.
proper footing and
WARNING
balance at all times.
!
Do not abuse cord.
Proper footing and
•
Never carry tool by its cord.
balance enable better
•
Never pull the cord to disconnect
control of the tool in unexpected
from receptacle.
situations.
1. Make sure cord is located so that it
4. Always work in a well-
will not be stepped on, tripped
ventilated area. Wear an
over, or otherwise subjected to
OSHA-approved dust
damage or stress.
mask and safety glasses.
2. Do not use an extension cord unless
absolutely necessary. Use of
improper extension cord could
www.chpower.com
5. Hold tool by insulated gripping
surface when performing an
operation where the tool may
contact hidden wiring. Contacting a
"live" wire will make exposed metal
parts of the tool "live" and shock
the operator.
6. Keep hands away from moving
parts.
7. Use clamps or another practical way
to secure the workpiece to a stable
platform. Never hold work in your
hand, lap, or against other parts of
your body when cutting.
8. Always use blades of the correct
size and shape mounting holes.
Blades that do not match the
mounting hardware of the saw will
increase risk of injury to the user
and damage to the tool.
Do not misuse this
TOOL USE AND CARE
WARNING
!
Do not use tool if
switch does not turn it on or off. Any
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
1. This tool must NOT be modified or
used for any application other than
that for which it was designed.
CAUTION
!
Do not force the
tool. Use the correct tool for your
application. The correct tool will do the
job better and safer at the rate for
which it is designed.
2. Maintain tools with care. Keep
Avoid accidental
cutting tools sharp and clean.
Properly maintained tools with
sharp cutting edges are less likely
to bind and are easier to control.
3. Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tool's operation. If
damaged, have the tool serviced
before using. Many accidents are
caused by poorly maintained tools.
4. Use only accessories that are
recommended by the manufacturer
for your model. Accessories suitable
for one tool may create a risk of
injury when used on another tool.
5. Some wood contains preservatives
which can be toxic. Take extra care
to prevent inhalation and skin
contact when working with these
materials. Request and follow all
safety information available from
your material supplier.
2
Garantía Limitada
1 DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación:
Un año
2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100
Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400
3. QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del
producto Campbell Hausfeld.
4. PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld
proporcionada o fabricada por el garante.
5. COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del
período de validez de la garantía.
6. LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
A. Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES
PARTICULARES, ESTAN LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto
es empleado para uso comercial, industrial o para alquiler, no se aplicará ninguna garantía. En algunos
estados no se permiten limitaciones a la duración de las garantías implícitas, por lo tanto, en tales casos
esta limitación no es aplicable.
B. CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN
DEFECTO, FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados
no se permite la exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales
casos esta limitación o exclusión no es aplicable
C. Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de
funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes,
abusos por parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual
de instrucciones suministrado también debe incluir la desconexión o modificación de los instrumentos
de seguridad. Si dichos instrumentos de seguridad son desconectados, la garantía quedaría cancelada.
D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
7. RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el
Garante, los productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de
funcionar adecuadamente, durante el período de validez de la garantía
8. RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado
Campbell Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los)
manual(es) del propietario
Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos.
Usted también puede tener otros derechos que varían de un Estado a otro. o de un país a otro.
23 Sp
DG460300CK