Using The Remote Control To Turn On Your System; When There's No Signal On The Skyfi3 Screen - Delphi SKYFi3 Kit for Bose System User Manual

Using the Remote Control
A sticker is included only for users
that own the Bose Wave Radio/CD.
Do not attach this sticker unless
you own the shown product.
Using the Remote to Turn on Your System
To get started, press the Power
System.
To switch to the SKYFi3, press the XM
the XM button, the Bose System will automatically switch to AUX
mode while your SKYFi3 is turning ON and loading the satellite
signal.
When your SKYFi3 is on and your Bose System displays AUX or
AUX 1 on the screen, it indicates that you are in the XM mode.

When There's No Signal on the SKYFi3 Screen

If you see "NO SIGNAL" on the SKYFi3 screen, you will need to
aim your antenna as described in "Receiving the XM Signal" on
page 10 or call 1.877.GO.DELPHI for customer support. Additional
information can be found in "Troubleshooting" on page 19.

Power
Power FM/AM CD
Mute
Wake to Alarm On/Off
Mute Play/Pause Stop/Eject
Time +
Wake to Alarm On/Off
Time + Time - Alarm time
Seek -
Vol +
Seek -
0
Vol +
Vol -
FM/AM CD
button to turn on your Bose
Play/Pause Stop/Eject
button. When you press
Sleep
Time -
Alarm time
Sleep
0
Seek +
Tune/
Seek +
enter
Tune/ CH +
Tune/
CH +
CH -