Receiving The Xm Signal - Delphi SKYFi3 Kit for Bose System User Manual

Receiving the XM Signal

Receiving the XM Signal
1. Plug in the Delphi power adapter and turn on your SKYFi3 by
holding down the Mode/Power button.
2. Turn on your Bose System and listen to the radio or CD at a
volume level that is low enough to be heard, but is very low. We
recommend setting the volume level to 30 while setting up your
SKYFi3.
3. With your SKYFi3 on, press the XM button on the included uni-
versal remote. (Be sure to insert the batteries into the remote. If
you are using a Bose Wave Radio/CD, you will also need to move
the switch inside the battery cover of the remote control to the
Bose/CD position.) Your Bose System will show AUX or AUX 1
on the display.
4. You should be able to hear channel 1, the XM Preview Channel.
If you do not, and the Delphi screen displays
"NO SIGNAL," try rotating your XM antenna
or moving it to another location. Make sure
the antenna points south or southwest.
See diagram below.
You may need to unwind your antenna and
place it outside in direct view of the South or
Southwest sky. For your convenience, your
XM antenna has been pre-installed on the hub.
0