LCD-80FC Indicator
1.2
Components & Wiring
Figure 1-1: Components
J2
Piezo Sounder
The LCD-80FC sounder, if enabled, will
be activated when any new alarm or
trouble is received from the panel. It is
silenced by an Acknowledge switch
press at the FACP. Piezo must not be
disabled without approval of the LAHJ
(Local Authority Having Jurisdiction).
8
OFF (not used)
ON = Piezo Enable
OFF = Receive only
Panel Configuration
Future use
Document 53244 Rev. A 03/14/08 P/N 53244:A
Components & Wiring
SW 1
Membrane Connector
Cable connection to membrane
switches for Acknowledge, Silence,
Drill and Reset.
Note: See "DIP
Switch Settings
Example" on
page 13.
Top view
J3
J1