Fire-Lite LCD-80FC Manual page 12

LCD-80FC Indicator
4 through 6 = Configuration for use with a particular FACP.
Switches 4, 5 and 6 are used to select the FACP (Fire Alarm Control
Panel) which is being connected to the LCD-80FC. Refer to the
following table for the appropriate switch settings.
Fire Alarm Control Panel
Use This Setting
Future Use
Future Use
Future Use
Future Use
Future Use
Future Use
Future Use
Programming Note: Depending on the FACP which is connected to
the LCD-80FC, it may be necessary to enable communication with
the indicator in the FACP programming. Refer to the appropriate
FACP manual for programming information.
7 and 8 = Future use.
12
Document 53244 Rev. A 03/14/08 P/N 53244:A
SW1 DIP Switch Settings
SW1-4 SW1-5
OFF OFF
OFF OFF
OFF ON
OFF ON
ON ON
ON OFF
ON ON
ON ON
SW1-6
OFF
ON
OFF
ON
OFF
ON
OFF
ON