Lcd-80Fc Indicator - Fire-Lite LCD-80FC Manual

LCD-80FC Indicator

LCD-80FC Indicator
Section 1:
The LCD-80FC Indicator is a compact, 80-character, backlit LCD fire
Indicator designed for use with compatible FACPs (Fire Alarm Control
Panel). It should be noted that the LCD-80FC Indicator display will
mimic the FACP display.
The LCD-80FC is capable of displaying English-language text of
system point status including device type, independent point alarm,
trouble or supervisory, zone and custom alpha labels programmed into
the control panel. The LCD-80FC also provides system status LEDs to
display Power, Alarm, Trouble, Supervisory and Alarm Silenced
conditions. The LCD-80FC is capable of performing local silence and
local lamp test.
Communication between the FACP and the LCD-80FC is accomplished
over a two-wire serial interface employing the EIA-485 communication
standard. Up to 32 indicators may be connected to the two-wire
EIA-485 circuit. The indicators may be powered from the host FACP or
remote UL listed, filtered, power supplies.
Programming Note: Depending on the FACP which is connected to the
LCD-80FC, it may be necessary to enable communication with the
LCD-80FC in the FACP programming. Refer to the appropriate FACP
manual for programming information.
6
Document 53244 Rev. A 03/14/08 P/N 53244:A