Serial Port; Power Button; Cover Open Button; Roll Paper Cover - Citizen PD-22 User Manual

Handy printer

Hide thumbs Also See for PD-22:

Table of Contents

External Appearance and Part Descriptions

3 Optical Receiver

Receives printing data through infrared transmission.

4 Serial Port

Connect the optional RS-232C cable here when using the cable for printing.

Turns the printer's power on and off.

To turn on the power, press this button continuously (2 to 3 seconds) until the power

LED lights up.

6 FEED Button (Paper Feed/Clear Error)

The paper is fed while this button is held down. The feeder does not operate unless

the paper is set in the printer.

Slide this button to open the cover. Close the cover after loading a roll paper.

8 Paper Check Window

Use to confirm that paper is loaded in the printer.

9 Cut Sheet Insertion Slot

Insert single sheets (cut sheets) of paper here.

0 Paper Exit Slot/Paper Cutter

The printed paper exits from the printer here. The slot includes a cutter (tear bar),

which is used to cut the paper from the roll after printing.

Open the cover to load a roll paper. Close the cover after the paper is loaded.

)

Table of Contents