Gs ( A Pl Ph N M (Execution Of Test Printing) - Citizen BD2-2220 Command Reference Manual

GS ( A pL pH n m
[Function]
[Code]
[Range]
[Outline]
• pL, pH will specify the number of subsequent parameters by (pL + (pH x256))bytes.
• "n" will specify the paper for test printing in the following table.
• "m" will specify the category of test printing in the following table.
[Caution]
Execution of test printing
<1D>H<28>H<41>H<pL><pH><n><m>
(pL + (pH x256)) = 2 (pL = 2, pH = 0)
0≤n≤3, 48≤n≤51
1≤m≤3, 49≤m≤51
Specified test printing will be executed.
n
0, 48 Basic paper (Paper rolls)
1, 49
2, 50 Paper rolls
3, 51
m
1, 49 Hexadecimal dump
2, 50 Printer's status printing
3, 51 Memory SW settings
• This command is only valid when processed at the head of a line during the
STANDARD MODE.
• The command will be ignored in PAGE MODE.
• During macro definition, if this command is processed, the macro definition is
suspended, and the command starts being processed.
• Printer will reset its hard disk after finishing test printing. Therefore, the printer
makes download characters, bit map images and macros undefined, clears there
caption buffer/print buffer, and returns the various settings to defaults. At this time,
the DIP switches are read again.
• Paper cutting is performed at the end of test printing.
• Printer will be BUSY when the processing of the command starts.
Category of Paper
Category of Test Printing
- 111 -