Hexadecimal Dump Printing - Citizen BD2-2220 Specifications

5.3.2 Hexadecimal Dump Printing

1) Function
Prints the data sent from the host in hexadecimal code and the corresponding characters.
2) Starting hexadecimal dump
With paper set and Head Up (or Platen Open), turn the power on while pressing and holding
the FEED switch. Set Head Down (or Platen Close). Then "HEX dump print mode" is printed
on the roll paper followed by the printing of data received thereafter in hexadecimal numbers
and corresponding characters.
Example: When dump printing is executed in non-Kanji mode.
• During hexadecimal dump, command other than Real time command has no function.
• When print data is less than one line, offline factor occurs to print the line.
3) End of hexadecimal dump
• Press the FEED switch consecutively three times. In this case "Completed" is printed and
paper is fed to the cut position and then a reset occurs. Otherwise, turn the power OFF or
perform a reset by the I/F signal.
Example: When dump printing is executed in Kanji mode.
ＨＥＸダンプ印字モード
1B 40 31 32 33 34 35 36 .@123456
37 38 39 30 0A
HEX DUMP PRINT MODE
1B 40 31 32 33 34 35 36 .@123456
37 38 39 30 0A
7890.
Completed
7890.
Completed
26