Self-Printing - Citizen BD2-2220 Specifications

5.3.1 Self-printing

1) Function
Function to enable the printer setting status to be verified by printing
2) Start of self-printing
When the power is turned on with the FEED switch pressed and held in print ready state,
printer status is printed on the roll paper.
Explanation of printed item is as shown below.
(1) Printer type name BD2-2220
(2) ROM version
(3) Mechanism used
(4) Interface setting
(5) Buffer size
(6) Content of DIP switch setting (Only serial interface)
(7) Jumper settings (Only JP1 to 3. JP4, 5 are not printed.)
(8) Content of memory switch
(9) Font A (20H ~ FFH)
(10) Font B (20H ~ FFH)
(11) Font C(20H ~ FFH)
(12) Kanji Font A 192 characters (Only Kanji specification)
(13) Kanji Font C 192 characters (Only Kanji specification)
(14) Line is fed up to cut position.
3) End of self-printing
Print a specified print pattern and perform resetting after printing for initialization.
VX.XXXXXX
25