Specifying Chords In The Normal Mode - Casio LK-73 Owner's Manual

1 Chord name
2 Clock number*
3 Measure number
4 Beat number
5 Flash
* 48 clocks = 1beat
7.
Input the length of the chord (how long it should
be played until the next chord is played).
Use the number keys to specify the length of a
chord. See "Specifying the Length of a Note" on
page E-42 for details.
Repeat steps 6 and 7 to input all the chords you
want.
If you make a mistake while step recording
chords, use the procedure under "Editing Data
While Step Recording" on page E-44 to make
corrections.
8.
After you finish step recording, press the
START/STOP or SONG MEMORY button.
This enters playback standby for the song you
have just input. Pressing the START/STOP button
plays it back.
You can use the FF and REW buttons to change the
current input position during step recording. See "Editing
Data While Step Recording" on page E-44 for details.
Pressing the [0] button in step 7 inputs a rest. Note,
however, that any rests you input do not have any effect on
Auto Accompaniment.
Track 1 Contents After Step Recording
In addition to chords, the following data is also recorded to
Track 1 during step recording.
Tone number
Rhythm number (step 4)
INTRO, SYNCHRO/ENDING, NORMAL/FILL-IN, VAR/
FILL-IN button operations (step 6)
641A-E-043A
Song Memory Function

Specifying Chords in the Normal Mode

When the MODE switch is set to NORMAL during step
recording, you can specify chords using a method that is
different from CASIO CHORD and FINGERED fingerings.
This chord specification method can be used to input 18
different chord types using only two keyboard keys, so
chords can be specified even if you don't know how to
actually play them.
1 Major
2 Minor
3 Augmented
4 Diminished
5 Suspended fourth
6 Seventh
7 Minor seventh
8 Major seventh
9 Minor major seventh
bk Seventh flat five
bl Minor seventh flat five
bm Seventh suspended four
bn Diminished seventh
bo Minor add ninth
bp Add ninth
bq Minor sixth
br Sixth
bs Six ninth
To specify a chord, hold down the key on the root input
keyboard that specifies the root, and press the key in the
chord type input keyboard to specify the chord type. When
inputting a chord with a specified bass note, pressing two
keys of the root input keyboard causes the lower note to be
specified as a bass note.
Example 1:
To input Gm7, hold down G on the root input keyboard
and press the m7 key on the chord type input keyboard.
E-41