Playing Back From Song Memory - Casio LK-73 Owner's Manual

3-step lesson
Hide thumbs Also See for LK-73:
Table of Contents

Advertisement

Playing Back from Song
Memory
Use the following procedure to play back song memory
contents.
To play back from song memory
1.
Use the SONG MEMORY button to enter
playback standby, and then use [+] and [–] to
select 0 or 1 as the song number.
The below song number screen remains on the
display for about five seconds. If it disappears
before you have a chance to select a song number,
use the SONG MEMORY button to display it
again.
2.
Press the START/STOP button to start
playback of the song you selected.
During song memory playback you can use the
LEFT/TRACK 1 and RIGHT/TRACK 2 buttons to
turn playback of either track on or off.
1
Indicator appears
You can use the TEMPO buttons to adjust the
tempo.
3.
Press the START/STOP button again to stop
playback.
During song memory playback, the entire keyboard
functions as a melody keyboard, regardless of the MODE
switch setting.
You can play along on the keyboard while playing back
from song memory. You can also use layer (page E-46)
and split (page E-47) to play along with more than one
tone.
You cannot use pause, fast forward or fast reverse
operations with song memory playback.
641A-E-041A
Song Memory Function
Real-time Recording to Track 2
After you record Track 1, you can use real-time recording to
add a melody in Track 2.
To record to Track 2 while playing back
Track 1
1.
Use the SONG MEMORY button to enter record
standby, and then use [+] and [–] to select 0 or
1 as the song number.
The song number you select should be the one
where you previously input Track 1.
The track is not yet selected at this point.
2.
Press the RIGHT/TRACK 2 button to select
Track 2.
1
Flash
3.
Make any of the following settings if you want.
Tone number (page E-18)
If you are not confident about playing at a fast
tempo, try using a slower tempo setting (page
E-22).
4.
Press the START/STOP button to start real-
time recording to Track 2 along with playback
from Track 1.
5.
Listening to the playback from Track 1, play
what you want to record to Track 2 on the
keyboard.
6.
Press the START/STOP or SONG MEMORY
button to end recording when you are finished
playing.
If you make a mistake while recording, stop the
record operation and begin over again from step
1.
E-39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents