Bush IDLED1901 Instruction Manual page 9

Rear Sockets
AV L
Outlined below is the Rear Sockets provided -
AV Input, R/L Audio Input, DC Power Source Input, YPbPr Input and HDMI2 Input.
Note: 1. The AV Input and YPbPr Input share one audio channel.
2. When the HDMI2 Input receives a DVI signal, the audio signal is received
from the R/L audio input.
Side Sockets
HDMI1 USB
Outlined below is the Side Sockets provided -
HDMI1 Input, USB Input, PC Audio Input, AV Output, VGA Input and RF Input.
Note: When the VGA Input receives a DVI signal ,the audio signal is received from the
PC Audio Channel.
ANTENNA
Note:
Aerial Connections: IEC(female).
Input Impendance: 75 unbalanced.
PC
STEPS:
Ensure the TV and your computer are both set
to power off before your connect.
1.Connect the VGA Input & PC Audio Input as
above.
2.Connect power supply again to your TV set.
3.Turn on the TV and then press the SOURCE
Buttons to select PC mode.
4.Then turn the PC power on.
DC 12V/3A
R Y Pb
PC AUDIO
Pr
HDMI2
AV OUTPUT
AV L
R
AV
HDMI1 USB PC AUDIO
-8-
INSTALLATION
VGA
AV OUTPUT
L
R
VGA RF
RF