Base Stand Installation; Installation - Bush IDLED1901 Instruction Manual

ACCESSORIES
Remote Control x 1
User s M anual x1
Battery(AAA) x 2
AV Cable x 1
Base Stand Assembly Instruction
1. Place the TV with the display side down
on a flat surface. Use a cloth to protect.
2.Secure the Stand to the TV by using 3 screws.
INSTALLATION NOTES
This TV can be connected to an AC 100-240 Volts, 50/60 Hz power supply. Never connect
straight to a DC power supply.
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
2. Place the Stand on the TV as shown
below.
-5-

INSTALLATION