Setting up the TV with your PC
¦
Preset: Press the SOURCE button to select PC mode.
N
Auto Adjustment
❑
Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
positions.
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
T
by selecting Tools → Auto Adjustment.
This function does not work in DVI-HDMI mode.
N
Screen
❑
Coarse / Fine
■
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and
Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on
the centre of screen.
PC Position
■
Adjust the PC's screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
■
You can replace all image settings with the factory default values.
SOUND
Configuring the Sound Menu
¦
Mode → Standard / Music / Movie / Clear Voice / Custom
❑
You can select these options by simply pressing the S.MODE button on the remote control.
O
●
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
●
●
Movie: Provides the best sound for movies.
●
Clear Voice: Emphasizes voice over other sounds.
●
Custom: Recalls your customized sound settings.
Equalizer
❑
The sound settings can be adjusted to suit your personal preferences.
●
Balance L/R: Adjusts the balance between the right and left speaker.
●
00Hz / 00Hz / KHz / KHz / 0KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.
If you make any changes to these settings, the sound mode is automatically switched to Custom.
N
SRS TruSurround HD → Off / On
❑
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
You can select these options by simply pressing the SRS button on the remote control.
O
English -
TV
Picture
Mode
: Dynamic
Backlight
0
Contrast
00
Brightness
Sharpness
0
Auto Adjustment
Screen
Advanced Settings
Picture Options
Reset
: OK
U Move
E Enter
R Return
TV
Screen
Coarse
0
Fine
PC Position
Image Reset
U Move
E Enter
R Return
TV
Sound
Mode
: Standard
Equalizer
SRS Trusurround HD : Off
Auto Volume
: Off
Speaker Select
: TV Speaker
Sound Select
: Main
U Move
E Enter
R Return