Installing Batteries in the Remote Control
¦
. Lift the cover at the back of the remote control upward as shown in the figure.
. Install two AAA size batteries.
Make sure to match the '+' and '–' ends of the batteries with the diagram inside the
N
compartment.
. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the
N
remote control for a long time.
If the remote control doesn't work, check the following:
N
•
Is the TV power on?
•
Are the plus and minus ends of the batteries reversed?
•
Are the batteries drained?
•
Is there a power outage or is the power cord unplugged?
•
Is there a special fluorescent light or neon sign nearby?
OPERATION
Viewing the menus
¦
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
Display the main on-screen menu.
DIRECTION / ENTERE
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
Operation the OSD (On Screen Display)
❑
The access step may differ depending on the selected menu.
. Press the MENU button.
. The main menu appears on the screen. The menu's left side has icons : Picture, Sound,
Channel, Setup, Input.
. Press the ▲ or ▼ button to select one of the icons.
. Then press the ENTERE button to access the icon's sub-menu.
. Press the ▲ or ▼ button to select the icon's submenu.
. Press the ◄ or ► button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
. Press the ENTERE button to complete the configuration. Press the EXIT button to exit.
MENU Button
Buttons
English -
OPERATION
HDMI
RETURN Button
Return to the previous menu.
EXIT
Exit the on-screen menu.
HDMI
TV
Picture
Mode
: Standard
Backlight
Contrast
80
Brightness
Sharpness
0
Colour
0
Tint (G/R)
G 0
R 0
Advanced Settings
Picture Options
Reset
: OK
U Move
E Enter
HDMI
R Return
TV
Picture
Mode
: Standard
Backlight
Contrast
80
Brightness
Sharpness
0
Colour
0
Tint (G/R)
G 0
R 0
Advanced Settings
Picture Options
Reset
: OK
U Move
E Enter
R Return
▲
Backlight
0
▼
U Move
L Adjust
R Return
Help icon