Specifications - Samson MDR1064 Owner's Manual

MDR1064 Specifications
Mono input channels
Microphone input
Frequency response
Distortion
Gain range
SNR (Signal to Noise Ratio)
Line input
Frequency response
Distortion (THD & N)
Sensitivity range
Stereo input Channels
Line input
Frequency response
Distortion (THD & N)
Impedances
Microphone input
Channel Insert return
All other inputs
Tape out
All other output
Equalization
Hi shelving
Mid bell
Low shelving
Low Cut filter
Main Mix Section
Noise (Bus noise)
Max output
AUX Return gain range
AUX Sends max out
Power Consumption
Power supply (AC/AC Adaptor)
Main voltage
Physical
Net weight
Shipping weight
Dimension (W D H)
electronically balanced, discrete input con-
figuration
10Hz to 45kHz
(THD & N) 0.005% at 4dBu, 1kHz
0dB to +40dB (MIC)
105dB
electronically balanced
10Hz to 45kHz
0.005% at 4dBu, 1kHz +
-10dBu to +30dBu
Balanced
10Hz to 45kHz
0.005% at +4dBu, 1kHz
4.5k Ohm
2.5k Ohm
14.8k Ohm or greater
1k Ohm
120 Ohm
+/- 15dB @12kHz
+/- 15dB @2.5kHz
+/- 15dB @80Hz
75Hz, 18dB/oct.
Levels full down: -100dBr (ref.:+4dBu)
Level set to 0 dB: 90dBr (ref.:+4dBu)
+22dBu balanced XLR,
22dBu unbalanced, 1/4" jacks
∞
to +15dB
+22dBu
15W
USA/Canada 108 - 132V, 60Hz
Europe 210 - 230V, 50Hz
U.K./Australia 240V, 50Hz
6.8 lb. (3.1Kg)
8.8 lb. (4.0Kg)
12.2" x 12.5" x 2.8" (310mm x 318mm x
70mm)
18