Change The Washing Program - AEG 76639 User Information

Multi-display
The expected time remaining (in minutes)
to the end of the program is displayed in
the multi display.
The counting down of the remaining time may be stopped or corrected
3
by the washing machine controller as a result of automatic adjustments
to the program (amount of washing, washing type, imbalance detec-
tion, special rinse cycle, etc.).

Change the washing program

Changing or stopping the wash program
0 1. Press the START/PAUSE button.
2. Turn the program selector to OFF. The washing program is stopped.
3. If required, set a new washing program. Otherwise, turn the program
selector to PUMP OUT and press the START /PAUSE button.
The washing program can be interrupted at any time with the START /
3
PAUSE button and can be continued by pressing the button again.
Changing the washing program is only possible after the program
selector has been turned to OFF.
Selecting the program options.
The program options QUICK WASH or STAIN can still be selected after
the program starts.
1. Press the START/PAUSE button.
0
2. Press the QUICK WASH or STAIN button.
3. Press the START/PAUSE button again. The washing program is
continued.
Changing the Spin Speed
During the washing program, the spin speed can still be changed or
RINSE HOLD can be set.
0 1. Press the START/PAUSE button.
2. Change the speed with the Spin speed/RINSE HOLD button.
3. Press the START/PAUSE button again. The washing program continues.
Operating Instructions
23