Execute A Washing Cycle; Brief Instructions; Set The Washing Program - AEG OKO-LAVAMAT 86820 User Instructions

Execute a washing cycle

Brief instructions

A washing cycle proceeds in the following steps:
0 1. Set the correct washing program:
– select the program and the temperature with the program selector
– select additional program(s) if required
2. Change final spin cycle speed if required/select end rinse.
3. Set b (DELAY TIMER) if required.
4. Open fill-in door, insert washing.
5. Close the fill-in door.
6. Add detergent/conditioner.
7. Start washing program.
After the washing program runs out:
Attention! If the washing cycle is completed at the end of a rinse, run
a C (PUMP OUT), D (SPIN) or F (SHORT SPIN) cycle before opening the
fill-in door.
8. Open the fill-in door and remove the washing.
9. Switch off the washing machine: Set program selector to I (OFF).

Set the washing program

See "Program Tables" for suitable program, correct temperature and
3
possible additional programs for various types of washing.
0 1. Set the program selector to the
desired washing program with
the desired temperature.
The selected program/the
selected program group is illumi-
nated.
The anticipated duration of the
selected program appears in the
multi-display in minutes.
Operating instructions
17