System Board Switches - HP Kayak XA 05xx Technical Information

HP Kayak XA 05xx PC Workstation — Technical Information
System Connectors and Switches

System Board Switches

The following diagram shows the position of the system board switches
on a Desktop HP Kayak XA Workstation:
Switch 1 is reserved and should not be used. Its default position is Up.
Switches 2 through 5 are used for processor settings as shown in the
following table and should be changed if the processor supplied with
the PC Workstation is replaced with a faster one.
Switch 2 Switch 3
1
UP UP
UP DOWN
UP DOWN
UP DOWN
1. UP=OFF, DOWN=ON.
8 English
Switch 4 Switch 5
DOWN DOWN
UP UP
UP DOWN
DOWN UP
System Board
Switches
Bus Speed Processor Speed
100 MHz 350 MHz
100 MHz 400 MHz
100 MHz 450 MHz
100 MHz 500 MHz