Battery Replacement - Alpine TDA-7547E Owner's Manual

1
2
Remote Control
Remote Control
(RUE-4182 supplied with TDA-7554/TDA-7552)

Battery Replacement

Applicable battery: Use one CR2025 or
equivalent.
Opening the battery case
1 Place the remote upside down at a
location that is level.
Looking at the back of the remote, grasp
the bottom of the unit between your fore
finger and thumb. Insert a pointed object
into the hole.
Keeping on sliding the pointed object in
the direction indicated by the arrow.
2 Pull the rear cover out with your thumb at
the same time.
Replacing the battery
Put the battery in the case with the (+)
indication upward as shown in the illustration.
Closing the case
Push the battery holder back into the remote
until a click is heard.
English
(TDA-7548E only)
49