Alpine TDA-7547E Owner's Manual page 47

REMOTE
CONTROL
UNIT
RUE-4180
7
8
9
BAND
PROG
CD/3D/6D
48
6
PWR
VOL
SOURCE A.PROC
Remote Control
Remote Control
(RUE-4182 supplied with TDA-7554/TDA-7552)
7
Button
Radio mode: Pressing the button will
select, in ascending order, stations
programmed into the radio's presets as
shown below.
Tape mode: Pressing the button
automatically seeks a next musical track
following several tracks from the current
track, depending upon the number of the
button pressed.
CD Shuttle mode: DISC Select (UP)
Button
1
Press the button to select a disc in
ascending order.
External audio processor mode:
Press the button to select the equalizer,
surround preset called with the A. PROC
button.
2
8
Button
Radio mode: SEEK (DN) Button
Tape mode: REW Button
3
CD Shuttle mode: Press the button to
go back to the beginning of the current
track.
4
9 Band/Program Button
Radio mode: BAND Button
5
Tape mode: Program Button
Press the button to change playback
direction. In combination of an Ai-NET
applicable head unit and multiple CD
sources... Press the button to select a
CD source.
Press the button, and the band will
change as shown below.
For the operation of external audio
*
processor, refer to the Owner's Manual
of the external audio processor you
purchased.
** The button is effective with Ai-NET
system unit used.
(TDA-7548E only)
6
1 2
English