Installing the Blower
Mount the blower to the wall or roof using screws,
through mounting trim flange.
Verifying Proper Operation
Temporarily re-install the remote blower
cover, using 2 screws per side).
Turn on the power supply at the circuit
Refer to the Retractable Vent Installation
Instructions for further instructions on
verifying the proper operation.
IMPORT T T T T ANT
If the remote blower does not operate properly, follow these troubleshooting steps:
1. Verify that power is being supplied to the Retractable Vent and the remote
2. Check the electrical connections to ensure that the installation has been
3. Repeat the above test.
4. If the appliance still does not work, contact Electrolux at 1-877-4Electrolux. Do
not attempt to repair the appliance yourself. Electrolux is not responsible for
service required to correct a faulty installation.
Wiring of Retractable Ventilation System
(E30DD75ESS, E36DD75ESS, E46DD75ESS
120VAC, 60Hz, 15A
Supply power from
dedicated circuit breaker