Planning For Installation - Electrolux E30DD75ESS Installation Instructions Manual

8

Planning for Installation

INSTALLATION PLANNING
A qualified technician must complete the installation of this appliance.
Carefully check the location where the remote blower is to be installed. The remote
blower should be placed for convenient access. Make certain that electrical power
can be provided in the selected location.
Plan the installation so that all minimum clearances are met or exceeded.
Dimensions shown provide minimum clearances, unless otherwise noted.
SPECIFICATIONS AND DIMENSIONS
NO NO
NO NOTE NO
All dimensional tolerances are + 1/16", - 0" unless otherwise stated.
Before commencing installation, remove the top cover of the remote blower. Check to
see if the blower wheel turns freely. Do not replace the top cover until the installation is
complete.
Blower Overall Dimensions
Top View
26" (660mm)
24" (610mm)
12 11/16" (322mm)
9 1/2"
(241mm)
C L C L
Power Supply
Conduit
Location
31 1/2"
(800mm)
33 1/2"
Intake Collar
Cutout
(851mm)
Location
Discharge
Figure 1
TE TE
TE TE
3 1/2"
(89mm)
C L
12 1/4"
(311mm)
C L
Mounting
Flange
Blower Overall Dimensions
Side View
11 1/2"
(292mm)
9 9/16"
(243mm)
10"
(254mm)
Intake Collar
Discharge
Figure 2