Connecting Two Units - Casio CFX-9970G Data Communications Manual

22-1 Connecting Two Units

The following procedure describes how to connect two units with an optional SB-
62 connecting cable for transfer of programs between them.
u u u u u To connect two units
1. Check to make sure that the power of both units is off.
2. Remove the covers from the connectors of the two units.
• Be sure you keep the connector covers in a safe place so you can replace
them after you finish your data communications.
3. Connect the two units using the SB-62 cable.
SB-62 cable
• Keep the connectors covered when you are not using them.
414