Audible Signals - Zanussi ZDT 201 User Manual

Salt

Audible signals

Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
– end of the washing programme,
– malfunction of the appliance
Factory setting: audible signals activated.
It is possible to deactivate the audible signals,
using the Programme selection/Cancel but-
ton.
Deactivation/activation of the audible sig-
nals
1. Press the On/Off button. The appliance
must be in setting mode.
2. Press and hold Programme selection/
Cancel button until programme light A
flashes and programme light B illuminates
with fixed light.
3. Press Programme selection/Cancel but-
ton again: programme light A becomes
fixed and programme light B starts flashing.
Indicator lights
Illuminates when the special salt has run out.
Is never illuminated while a washing programme is
running.
4. After a few seconds:
– programme light A turns off
– programme light B goes on flashing
– End of programme light illuminates
with fixed light, indicating that the audi-
ble signals are active.
5. To deactivate the audible signals press
again the Programme selection/Cancel
button: the End of programme light turns
off indicating that the audible signals have
been deactivated.
6. To memorise the operation, switch off the
dishwasher.
7. To activate again the audible signals, sim-
ply follow the above operations until the
End of programme indicator light illumi-
nates.
7