Electrolux 5995438602 Installation Instructions Manual page 12

12
Duct Preparation
IMPOR IMPOR IMPOR IMPORT T T T T ANT IMPOR
• Tape all duct joints securely to prevent combustion by-products, smoke or odors
from entering the home. This will also improve the efficiency of the system.
• Do not exhaust more than one vent into a single duct run.
• Only use ductwork constructed of materials deemed acceptable by state,
municipal and local codes.
Refer to the table below for recommended maximum straight lengths of duct to
provide adequate performance.
Model
E30WV60EPS
E36WV60EPS
E48WV12EPS
E308WV60ES
E368WV60ES
E488WV120S
E30WV60EPS
E36WV60EPS
E308WV60ES
E368WV60ES
Refer to the table below for recommended sheet metal elbows, transitions, and
wall cap equivalent straight lengths.
Recommended sheet metal elbows, transition, and wall cap equivalent straight lengths
3 1/4" x 10" 90° Elbow
15 Feet
Transistion
3 1/4" x 10" to Round
8" Diameter - 4 Feet
10" Diameter - 4 Feet
ANT ANT ANT ANT
Duct Maximum Equivalent Straight Lengths
Size
10"
3 1/4" x 10"
8"
3 1/4" x 10" 45° Elbow
7 Feet
45° Elbow - Round Duct
8" Diameter - 3 Feet
10" Diameter - 2 Feet
50'
50'
60'
3 1/4" x 10" Wall Cap 3 1/4" x 10"
90° Flat Elbow
2 Feet
90° T ransistion 90° Elbow - Round Duct
3 1/4" x 10" to 8" Round
25 Feet 8" Diameter - 7 Feet
10" Diameter - 5 Feet
20 Feet