Canon CANOSCAN FB330 series Service Manual page 118

CHAPTER 5
· Resolution : Set a resolution for the image to be scanned.
· How to Scan : Set a processing method of the scanned image. When "Read in memory (no
file)" is selected, scanned image is read into the memory, then abandoned
after readout. When "Save to TIFF file" is selected, the file of "img0.tif" is set
up in the same folder with the Canon Scanner Test USB.
File space to be created is as follows.
75 dpi : Approx. 1.6 MByte
150 dpi : Approx. 6.5 MByte
300 dpi : Approx. 26.2 MByte
600 dpi : Approx. 105 MByte
Note: Confirm before scanning that the available disk space on the HDD in which the
Canon Scanner Test USB is installed exceeds above file space.
5 - 20
COPYRIGHT © 1999 CANON INC. CANOSCAN FB330/FB630 SERIES REV.0 OCT. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 5-21