Canon CANOSCAN FB330 series Service Manual page 104

CHAPTER 5
IV. CANON SCANNER TEST
A. Outline
Canon Scanner Test is utility software to check if faulty scanner operation is due to
hardware or communication with a host computer.
CanoScan FB330P/FB630P : Scnfbp.exe
CanoScan FB630U/FB636U : ScanTestU.exe
B. Canon Scanner Test for CanoScan FB330P/FB630P
1. Operating environment
1) CanoScan FB330P/FB630P
2) PC/AT Compatibles (Pentium or faster is recommended.)
3) Windows95/98/NT Operating System
4) Scanner Device Driver
Note: Install the scanner device driver before using the Canon Scanner Test.
2. Functions
Canon Scanner Test has the following functions.
1) Scanner Information
Product ID, ROM version, etc. are shown when the scanner is properly communicated with
the host computer.
2) Calibration
Calibration for the scanner is performed.
3) Save Test Data
Contact image sensor output is tested and saved as text data "test_dat.txt" in the same
folder with the Canon Scanner Test.
4) Scan
Any image is scanned and saved as image file in the same folder with the Canon Scanner
Test.
5 - 6
COPYRIGHT © 1999 CANON INC. CANOSCAN FB330/FB630 SERIES REV.0 OCT. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)