Canon CANOSCAN FB330 series Service Manual page 110

CHAPTER 5
C. Canon Scanner Test USB for CanoScan FB630U/FB636U
1. Operating environment
Windows environment
1) CanoScan FB630U/FB636U
2) PC/AT Compatibles (Pentium or faster is recommended.)
3) Windows98 Operating System
4) Scanner Device Driver
Macintosh environment
1) CanoScan FB630U/FB636U
2) Power Macintosh
3) Macintosh OS (Version 8.5 or later)
4) Scanner Device Driver
Note: Install the scanner device driver before using the Canon Scanner Test USB.
2. Functions
Canon Scanner Test USB has the following functions.
1) USB Information (Windows only)
Scanner information recognized by Windows.
2) Scanner Information
Product ID, ROM version, etc. are shown when the scanner is properly communicated with
the host computer.
3) Self Test
Scanner self test is performed.
4) Save Test Data
Contact image sensor output is tested and saved as text data "test_dat2.txt" and
"test_dat4.txt" in the same folder with the Canon Scanner Test USB.
5) Scan
Any image is scanned and saved as image file in the same folder with the Canon Scanner
Test USB.
6) Start Button Check (Windows only)
Operation of the Start Button on the front of the scanner is checked.
5 - 12
COPYRIGHT © 1999 CANON INC. CANOSCAN FB330/FB630 SERIES REV.0 OCT. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)