Optional Paper Tray (Lt-5400); Memory Board; So-Dimm Types - Brother MFC-8950DW Advanced User's Manual

Optional paper tray
(LT-5400)
An optional lower tray can be installed on the
1
MFC-8950DW , and it can hold up to 500
sheets of 20 lb (80 g/m
When an optional tray is installed, the
machine can hold up to 1050 sheets of plain
paper.
For setup, see the Instructions that we have
supplied with the lower tray unit.
1
Tray 2 is standard on MFC-8950DWT.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
B
2
) paper.

Memory board

MFC-8950DW(T) has 128 MB of standard
memory. The machine has one slot for
optional memory expansion. You can
increase the memory up to maximum of
384 MB by installing one SO-DIMM (Small
Outline Dual In-line Memory Module).

SO-DIMM Types

For information regarding memory for your
Brother machine please visit us at:
http://www.brother-usa.com/support/
memory/.
In general, the SO-DIMM must have the
following specifications:
Type 144-pin and 16-bit output
CAS latency 4
Clock 267 MHz (533 Mb/S/Pin) or
frequency more
Capacity 256 MB
Height 1.18 in. (30.0 mm)
DRAM type DDR2 SDRAM
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
Customer Service.
Options
B
B
B
79