Making Copies; How To Copy; Stop Copying; Copy Settings - Brother MFC-J430W Basic User's Manual

8

Making copies

How to copy

The following steps show the basic copy
operation.
a
Make sure you are in copy mode, press
(COPY).
 The LCD shows:
1 No. of Copies
You can enter the number of copies you
want by using the dial pad.
Note
The default setting is FAX mode. You can
change the amount of time that the
machine stays in COPY mode after the
last copy operation.
(uuAdvanced User's Guide: Mode Timer)
b
Do one of the following to load your
document:
Place the document face down in the

ADF.
(See Using the ADF uu page 23.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
uu page 24.)
c
If you want more than one copy, enter
the number (up to 99).
8
d
Press Mono Start or Color Start.

Stop copying

To stop copying, press Stop/Exit.

Copy settings

You can change the following copy settings.
Press COPY and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
(Basic User's Guide)
1
For details about changing the following copy
settings uupage 46.

Paper Type

Paper Size
(Advanced User's Guide)
For details about changing the following copy
settings
uuAdvanced User's Guide: Copy settings

Quality

Enlarge/Reduce

Page Layout

2in1(ID)

Stack/Sort

Density

Set New Default

Factory Reset
Note
If you want to sort copies, use the ADF.
8
8
8
8
45