Yamaha YZF-R1Z Owner's Manual page 71

1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
4. Install the reservoir cap, and then
install the coolant reservoir cover
by installing the bolts.
To change the coolant
1. Place the vehicle on a level sur-
face and let the engine cool if nec-
essary.
2. Remove cowlings B and C. (See
page 7-9.)
3. Place a container under the engine
to collect the used coolant.
PERIODIC MAINTENANCE AND ADJUSTMENT
4. Remove
1
WARNING! Never attempt to re-
move the radiator cap when the
engine is hot.
1. Radiator cap
5. Remove the coolant drain bolt and
its gasket to drain the cooling sys-
tem.
EAU47302
1
1. Coolant drain bolt
2. Gasket
the radiator cap.
[EWA10381]
1
1. Coolant reservoir cover
2. Bolt
2
1
7-17
6. Remove the coolant reservoir cov-
er by removing the bolts, and then
remove the coolant reservoir cap.
1
2
7. Remove the coolant reservoir by
removing the bolts, and then turn
the reservoir upside down to emp-
ty it.
7