Yamaha YZF-R1Z Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function
equipped with the following:
G a speedometer
G
a tachometer
G
an odometer
G
two tripmeters (which show the
distance traveled since they were
4
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G a stopwatch
G
a clock
G
a coolant temperature display
G
an air intake temperature display
G a transmission gear display
G a drive mode display (which shows
the selected drive mode)
G
a throttle opening position display
G a fuel consumption display (instan-
taneous and average consumption
functions)
G
a self-diagnosis device
G a display brightness, shift timing
indicator light and throttle opening
position display control mode
meter unit is TIP
G
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
G
To switch the speedometer and
odometer/tripmeter/fuel consump-
tion displays between kilometers
and miles, press the "SELECT"
button for at least one second.
Tachometer
1
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle sweeps once across
the r/min range and then returns to zero
r/min in order to test the electrical cir-
cuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 13750 r/min and above
Clock and stopwatch modes
2
1. Clock/stopwatch
4-7
ECA10031
1