Checking And Lubricating The Sidestand; Lubricating The Swingarm Pivots; Checking The Front Fork - Yamaha YZFR6Y Owner's Manual

Table of Contents

Advertisement

PERIODIC MAINTENANCE AND ADJUSTMENT
Checking and lubricating the
sidestand
The operation of the sidestand should
be checked before each ride, and the
sidestand pivot and metal-to-metal
contact surfaces should be lubricated if
necessary.
7
WARNING
If the sidestand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Recommended lubricant:
Lithium-soap-based grease
EAU23202
Lubricating the swingarm piv-
ots
The swingarm pivots must be lubricat-
ed at the intervals specified in the peri-
odic maintenance and lubrication chart.
Recommended lubricant:
Lithium-soap-based grease
EWA10731
EAUM1650

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1. Place the vehicle on a level sur-
2. While applying the front brake,
7-32
face and hold it in an upright posi-
tion. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10751]
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
EAU23272

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzfr6yc

Table of Contents