Adjusting The Front Fork - Yamaha YZFR6Y Owner's Manual

3. Pass one of the other snap hooks
of the cable through the helmet
strap buckle, and then clip the
snap hook onto the cable holder as
shown.
1. Helmet holding cable
2. Helmet
4. Install the passenger
WARNING! Never ride with a
helmet attached to a helmet
holding cable, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA14331]
INSTRUMENT AND CONTROL FUNCTIONS
1. Helmet holding cable
2. Helmet
To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Unfasten the snap hooks from the
cable holder, and then remove the
seat.
cable from the helmet strap buck-
le.
3. Install the passenger seat.
4-18

Adjusting the front fork

WARNING
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting screws, compres-
sion damping force adjusting bolts (for
fast compression damping) and com-
pression damping force adjusting bolts
(for slow compression damping).
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
EAU38943
EWA10180
4
ECA10101